Builder Setup info:
Press the enter key to see Builder setup menu.
Press the enter
key on General Axis. Click on link to see General Axis setup information.
Move down to Spindle Axis and press the enter key. Click on link
to see Spindle axis
setup information.
Move down to Basic I O Interface and press the enter key. Click on
link to see Basic I O
Interface
setup information.
The next choice is Prog. I/O Interface. Click on link to go to Prog. I O Interface setup information.
The next choice is Z axis Type. Click on link to go to Z Axis Type setup information.
The next choice is U axis. Click on link to go to U axis setup information.
The next choice is Handwheel/DRO. Click on link to go to Handwheel/DRO setup information.
The next choice is Tool Management. Click on link to go to Tool Management setup information.
The
next choice is Miscellaneous. Click on link to go to Miscellaneous setup information.
The
next choice is Home. Click on link to go to HOME setup information.
The
next choice is Builder Text. Click on link to go to Builder Text setup information.
The
next choice is Language. Click on link to go to Language
setup information.
The next choice is Software Update. Click on link to go to Software Update setup information.
The
next choice is DNC Setup. Click on link to go to DNC Setup
information.
The
next choice is Security. Click on link to go to Security setup information.
The
next choice is Probing. Click on link to go to Probing setup information.
