DNC Setup info:
Press the enter key to see the DNC setup menu.
Press the enter key on Execution mode, there are 2 choices. The buffered choice is preferred.
Drip feed will cause the CNC to pause between down loading to memory.
The next choice down is buffer size which deals with how much memory do you want to set aside to use while in the buffered mode. Press the enter key to see the menu of choices.
I have found if you use the choice MAX, then the CNC usually will not out perform the RS232 down load to the CNC.
The next choice down Ignore ToolComp and Corner Radius, is usually YES. Most of the time the program you are sending to the CNC was created on a Cad/Cam system, therefore the cutter path is already compensated for.
The next line down Wait for start has 3 choices. Press the enter key to see the options.
