|
|
||
|
|
|
|
|
PART # |
DESCRIPTION |
|
|
|
|
|
|
|
CPU BOARDS AND MEMORY |
|
|
386SX16 MOTHERBOARD ( 2MB SIMM & I/O CONTROLLER ON BOARD). Size of the Board is 8.5” X 13” |
||
|
386SX25 MOTHERBOARD (2MB SIMM WITHOUT I/O CONTROLLER) Size of the board is 8.5” x 9” |
||
|
386SX33 SBC ( SMALL PS2 STYLE KEYBOARD CONNECTOR AND 2 EA. 1MB SIMM) EFFECTIVE 8/1/94 WHILE SUPPLY LASTS. REPLACE WITH PENTIUM SBC AND HARD DRIVE UPGRADE KIT |
||
|
486DX66 SBC WITH ONE EA. 72PIN 2MB SIMM EFFECTIVE 6/1/96 WHILE SUPPLY LASTS. REPLACE WITH PENTIUM SBC AND HARD DRIVE UPGRADE KIT |
||
|
486DX4-100 SBC. ( EFFECTIVE 2/1/97 ) ONLY TO BE USED TO REPLACE THE SAME TYPE SBC BOARD. WILL NOT REPLACE PREVIOUS CPU BOARDS WITHOUT ADDITIONAL SPECIFIC CABLES AND PARTS. |
||
 91400237S
|
486DX4-100 with Networking SBC ( EFFECTIVE 2/97 ) |
|
|
BATTERY FOR 486DX4-100 SBC |
||
|
90400915 |
ONE MB SIMM MEMORY MODULES ( USED ON ALL 386 VERSION BOARDS.) |
|
|
90400940 |
2MB SIMM 72 PIN ( 486DX66 ONLY ) OBSOLETE |
|
|
90400941 |
4MB SIMM FOR 486DX4-100 AND 486DX-66 |
|
|
90400948 |
8MB MEMORY MODULE 486DX4-100 |
|
|
90400956 |
16MB MEMORY MODULE 486DX4-100 |
|
|
90400949 |
32MB MEMORY MODULE 486DX4-100 |
|
|
90400950 |
64MB MEMORY MODULE 486DX4-100 |
|
|
SPECIAL |
PENTIUM
UPGRADE FOR |
|
|
PENTIUM P5-166 SBC 8 MB |
||
|
PENTIUM P5-166 SBC 8 MB W/ ETHERNET |
||
|
PENTIUM P5-166 SBC 16 MB |
||
|
PENTIUM P5-166 SBC 16 MB W/ ETHERNET |
||
|
PENTIUM P5-166 SBC 32 MB |
||
|
PENTIUM P5-166 SBC 32 MB W/ ETHERNET |
||
|
PENTIUM P5-166 SBC 64 MB |
||
|
PENTIUM P5-166 SBC 64 MB W/ ETHERNET |
||
|
PENTIUM P5-233 SBC 8 MB W/ ETHERNET |
||
|
PENTIUM P5-233 SBC 16 MB W/ ETHERNET |
||
|
PENTIUM P5-233 SBC 32 MB W/ ETHERNET |
||
|
PENTIUM P5-233 SBC 64 MB W/ ETHERNET |
||
|
90400960 |
8 MB MEMORY MODULE 5V / 72P / 60NS / FPM |
|
|
90400961 |
16 MB MEMORY MODULE 5V / 72P / 60NS / FPM |
|
|
90400962 |
32 MB MEMORY MODULE 5V / 72P / 60NS / FPM |
|
|
90400963 |
64 MB MEMORY MODULE 5V / 72P / 60NS / FPM |
|
|
315878-02 |
CR2032 Battery for PENTIUM 233 CPU. |
|
|
|
|
|
|
|
MOTION CONTROL BOARDS |
|
|
2 + 2 AXIS MOTION BOARD (USED ON 2X SINGLE CABINET DESIGNS ONLY) |
||
|
3 AXIS MOTION BOARD (STANDARD) |
||
|
4 AXIS MOTION BOARD (OPTIONAL SPINDLE CONTROL) |
||
|
|
||
|
DSP 33MHZ NOT COMPATIBLE WITH PREVIOUS DSP BOARDS WITHOUT ABOVE KIT. |
||
|
DSP ADAPTER HARNESS USED WITH ABOVE KIT. |
||
|
KIT DSP UPGRADE FOR 1100 CNC, FROM M2 TO M5 BOARD. |
||
|
|
|
|
|
PART # |
DESCRIPTION |
|
|
|
|
|
|
|
MISCELLANEOUS PC BOARDS |
|
|
PASSIVE BACKPLANE 6 SLOT |
||
|
PASSIVE BACKPLANE 4 SLOT |
||
|
FLASH MEMORY BOARD. FOR NON-486DX4-100 VERSIONS. |
||
|
FLASH MEMORY BOARD 486DX4-100 VERSION SYSTEMS ONLY |
||
|
BATTERY 3.6V FOR FLASH MEMORY |
||
|
1MB EXTENDED MEMORY BOARD.( USED ON 2MB UPGRADES) |
||
|
I/O CONTROLLER CARD (25MHZ SYSTEMS) |
||
|
VGA BOARD (NOT USED ON 486DX4-100 AND PENTIUM SYSTEMS) |
||
|
|
|
|
|
|
MISCELLANEOUS PARTS |
|
|
MOV 115V |
||
|
EMI FILTER |
||
|
M-FUNCTION OPTION GREEN KEY |
||
|
|
|
|
|
|
POWER SUPPLY |
|
|
POWER SUPPLY FOR COMPUTER |
||
|
|
|
|
|
|
FLOPPY AND HARD DRIVES |
|
|
3 ½ FLOPPY DRIVE |
||
|
31300205M, HARD DRIVE 3.5 inch, Replaced by 748869-01 |
||
|
|
|
|
|
|
HARNESSES |
|
|
5V&12V FOR 2+2 MOTION BOARD |
||
|
12VDC INTERNAL HARNESS |
||
|
COM2/PRINTER FOR 486DX4-100 SYSTEMS |
||
|
COM 2 INTERNAL HARNESS |
||
|
36000562 |
FLOPPY DRIVE POWER HARNESS |
|
|
FLOPPY DRIVE CABLE FOR 486DX4-100 SYSTEMS |
||
|
HARD DRIVE CABLE FOR 486DX4-100 SYSTEMS |
||
|
LOAD RESISTOR KIT FOR 486DX4-100 SYSTEMS |
||
|
RS232 COM 1 CABLE |
||
|
|
|
|
|
|
COMPUTER ASSEMBLY REPAIRS |
|
|
|
ASSEMBLY REPAIRS HAVE A 6 MONTH WARRANTY |
|
|
The Computer repair prices are for a standard repair due to component failure. |
||
|
Additional charges may be applied for damages to the unit which are not due to a defective component. |
||
|
RP 1100 COMPUTER |
REPAIR OF COMPLETE COMPUTER CHASSIS WHICH MAY CONTAIN ANY ONE OF THE ABOVE CPU STYLE BOARDS AND MISCELLANEOUS EQUIPMENT. |
|
|
|
ABOVE DOES NOT INCLUDE PENTIUM UPGRADE. PENTIUM UPGRADE WILL BE PRICED BASED ON LABOR AND OTHER OPTIONS SELECTED. |
|